HS2 is an ultra-portable full-frequency full-mode SDR radio. Receive frequency coverage 300K~1.6GHZ. The built-in network port can realize remote operation and remote firmware upgrade. The HAM-BOX mobile app we developed allows the mobile phone to easily control and play radio stations(the app is still under development, any progress we will post on ailunce website). HS2 adopts a full keyboard design, built-in Bluetooth module, sound card module and serial communication port module. Full support for currently popular radio control software and logging software. We are working hard to give you more playable space.
Real-time spectrum.
Waterfall chart.
Using software-defined radio technology (SDR), full-band support SSB, CW, RTTY, AM, FM.
Double frequency conversion circuit structure.
IF width and IF shift hardware and software can be modified to provide powerful IF interference suppression.
DSP digital noise reduction.
Built-in 160-6m high-speed automatic antenna tuner.
Built-in electronic key controller, all parameters can be set flexibly.
Built-in sound card with IQ and audio output.
Built-in FLASH memory(under development).
USB TYPEC3.1 interface for power supply and computer connection.
High accuracy TXCO ± 0.5ppm (-10-60 ℃).
Built-in GPS / Beidou, GSM, electronic compass (acceleration, angle sensor) (optional)
GPS time (requires optional GPS module).
Unique LORA data transmission (requires optional LORA module).
Built-in network port, support remote firmware upgrade(under development).
Configuration
|
Standard Configuration |
Option Configuration |
|
FM module |
GPS module |
|
Wired microphone |
LORA module |
|
Bluetooth microphone |
Electronic compass module |
|
Built-in sound card |
Bluetooth module |
|
Built-in automatic antenna tuner |
Shortwave balcony antenna |
|
Built-in memory |
External frequency wheel(under development) |
Note *1: Frequency range is different according to different countries or areas, the actual frequency
by local legal provisions.
Note *2: Data retention.
Note *3: to be calibrated, the final interpretation of all manufacturers.
-
Transmitter Architecture
SDR
Transmission Mode
SSB, CW, RTTY, AM, FM
Frequency Resolution
1Hz
Transmit Frequency Range*1
1.800-2.000,3.500-3.900,5.351.5-5.366.5, 7.000-7.200, 10.100-10.150, 14.000-14.350,
18.068-18.168,21-21.450,24.890-24.990, 28-29.7,50-54, 144-146, 430-440MHz
Output Power
HF+6m:SSB(1~20W),CW(0.1~20W), FM(0.1~20W), AM(1~5W),
VHF: SSB/CW/FM(0.5~5W)
UHF:SSB/CW/FM(0.5~5W)
Power Consumption
TX:13.8V~5A
RX:13.8V~0.25A(Normal),0.35A(Max brightness&Highest audio)
Carrier Suppression
<50db
Spurious Suppression
1.8—54MHZ: ≥50db
144—146MHZ: ≥60db
430—440MHZ: ≥60db
Memory Channel
999
Receiver Parameters
Receiver Architecture
SDR
Receiver Mode
SSB, CW, RTTY, AM, FM
Receive Frequency Range
300KHz-1.6GHz*2
IF Bandwidth
20KHz
IF
12KHz
Sensitivity*3
SSB/CW:（BW: 2.4kHz @ 10dB S/N）
0.18uV（1.8—54MHZ）,
0.25uV（144—146MHZ）,
0.25uV（430—440MHZ）
AM:（ BW: 6kHz @ 10dB S/N）
15uV（0.3—1.8MHZ）,
2uV（1.8—54MHZ）,
2uV（144—146MHZ）,
2uV（430—440MHZ）
FM:（BW: 15kHz @ 12dB S/N）
0.5uV（28.0—29.7MHZ）,
0.25uV（50—54MHZ）,
0.3uV（144—500MHZ）,
0.5uV（430—440MHZ）
IF Suppression
≥70db
Image Suppression
≥80db
Audio Output Power
2W (10% distortion rate, 8Ω load, 3KHZ)
Antenna tuner parameters
Tuning frequency range
1.8-54MHZ
Tuning impedance range
16.7Ω--150Ω unbalanced (SWR is better than 1: 3)
Tuning accuracy
VSWR: 1: 1.5 or less
Tuning time
2-5S (full segment 10S)
Tuning method
Automatic / Manual
Spectrum parameters
Spectrum bandwidth
48K
RF Spectrum
FFT
Structural parameters
Size
170X120X45mm (excluding protrusions)
Weight
＜1KG
Working voltage parameters
Voltage range
5—32V receiving range,
5-12V transmit power limit,
12-15v UV full power output,
12-18V HF full power output,
15/18-32V prohibits transmit.
Antenna interface
Antenna interface
TNC/BNT/M/N (optional)
Working environment parameters
Working temperature
-10 ℃ to 60 ℃
Working humidity
10% -- 90%
- Real-time spectrum.
- Waterfall chart.
- Doppler frequency tracking(under development).
- Using software-defined radio technology (SDR), full-band support SSB, CW, RTTY, AM, FM.
- Double frequency conversion circuit structure.
- IF width and IF shift hardware and software can be modified to provide powerful IF interference suppression.
- DSP digital noise reduction.
- Built-in 160-6m high-speed automatic antenna tuner.
- Built-in electronic key controller, all parameters can be set flexibly.
- Built-in sound card with IQ and audio output.
- Built-in FLASH memory(under development).
- USB TYPEC3.1 interface for power supply and computer connection.
- High accuracy TXCO ± 0.5ppm (-10-60 ℃).
- Ultra-wide working voltage range: 5-32VDC.
- Power Reversed Polarity Connection Protection
- Built-in GPS / Beidou, GSM, electronic compass (acceleration, angle sensor) (optional)
- GPS time (requires optional GPS module).
- Built-in UTC clock.
- Voltage display.
- Unique LORA data transmission (requires optional LORA module).
- Ultra-light weight: ≤1KG
- Built-in network port, support remote firmware upgrade(under development).
_tb.jpg "HS2-(5) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(3) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(4) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(1) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(8) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(9) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(6) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
_tb.jpg "HS2-(7) RETEVIS AILUNCE HS2 Full-frequency Full-mode Ultra-portable SDR Radio")
.jpg)
_md.jpg "product")
