Description

Retevis RT97L Customizable 25W Waterproof Analog Repeater

rt97l-details-new-2.jpg

rt97l-details-new-6.jpg

retevis-rt97l-details-4.jpg

rt97l-details-new-9.jpg

rt97l-details-new-7.jpg

rt97l-details-new-8.jpg

rt97l-details-new-5.jpg

rt97l-details-new-1.jpg

rt97l-details-new-4.jpg

FAQ

1. RT97L repeater programming software has a problem when writing frequency?

When you click "Read", a password input box will appear. You can directly click "close" to ignore it, or input 288288.

If you want to set a password, click "write", the first "password" is 288288, then enter your "New Password".

2. Will the speaker-microphone from the RT97S work on the RT97L? 

Yes, the speaker-microphone for the RT97S and RT97L are compatible and can be used interchangeably.

3. What is the height and wind resistance rating of the RT97L antenna? 

The RT97L antenna model is MA09, operating in the 462-467 MHz frequency range.

Height: 175 cm (approximately 5.74 feet)

Wind resistance: 50-60 m/s

Additional specifications:

VSWR (Standing Wave Ratio) < 1.5

Antenna gain: 7.2 dBi

Connector type: SL16-K

Material: Fiberglass

3. Can the antenna cable that came with the RT97S be used for the RT97L?

Yes, the 15-meter 50-3 Pure Copper Coaxial Extender Cable for RT97 will work with the RT97L. However, the RT97L’s antenna cable has been upgraded to 15 meters of 50-7 cable, which offers lower loss compared to the previous version.

4. Can I replace the SL-16 connector with an N-type connector on the RT97L?

Yes, the RT97L can be adapted to use an N-type connector. We recommend the following two options:

Use an adapter: This is the most cost-effective and preferred method. The adapter is inexpensive and ensures no signal loss.

Replace the connector yourself: If you choose to replace the connector, please ensure that you use coaxial cable with an outer diameter of 4mm. Be cautious, as improper replacement can damage the paint and affect the waterproofing.

5. What’s the Difference Between 5W and 25W Power?

The difference in power between 5W and 25W is significant, especially when it comes to communication range. With 5W, communication over long distances may result in weak signals or no reception at all. In contrast, 25W power can significantly improve the signal range, allowing for clearer and more reliable communication over much longer distances. While power plays a crucial role, factors such as antenna height also impact range. In areas where elevation isn’t favorable, increasing the power to 25W helps extend the communication range and overcome obstacles.

6. Is the Actual Output Power Really 25W?

The factory output of the RT97L repeater is between 22W and 25W. However, when the repeater operates with an internal duplexer, some power loss may occur. As a result, the actual output power may range from 15W to 22W depending on the quality, thickness, and length of the feeder cable. While the power might fluctuate a bit, it still ensures solid, reliable performance in most conditions.

7. What’s the Customizable Repeater Frequency Range? 

The RT97L allows for customizable frequency settings. You can choose between:

  • UHF: 400-470MHz

  • VHF: 136-174MHz

The offset should be ≥5MHz and ≤12MHz, and frequencies should be programmed within ±200 kHz.

8. What Is Amp Absorption in TX and RX?

  • Receive Mode Absorption: 180mA
  • Transmit Mode Absorption: 5.5A

9. How is the RT97L Waterproof Even if the Doors Are Uncovered?

The RT97L mobile repeater is rated IP66 waterproof, meaning it can withstand powerful jets of water from all directions. This rating ensures that it performs well even in harsh weather or environments with heavy water flow. However, to ensure optimal performance and longevity, it's always a good idea to install the repeater in a protected location, especially in areas with extreme weather conditions.

10. Does the RT97L Have an Internal Duplexer?

Yes, the RT97L portable repeater comes equipped with an internal duplexer, which is essential for enabling the repeater to work efficiently with an antenna. The duplexer allows the device to handle both transmit and receive signals simultaneously without interference.

11. How Many Channels Does the RT97L Have? And What Does It Mean?

The RT97L is capable of storing 16 different channels, which means it can quickly switch between up to 16 communication frequencies.

12. What is the RT97L's Duty Cycle?

The duty cycle for RT97L repeater is 100%.

13. What’s the difference between RT97S and RT97L?

That main difference between RT97S and RT97L is that RT97L is a 25W high power repeater while RT97S is 10W. And RT97L has the IP66 waterproof certification.

Spec

Specifications

Model: RT97L
Frequency: Customizable
Channels: 16
Power: 25W(High)/5W(Low)
Working Voltage: 13.8V             
Waterproofing Grade: IP66
Weight: 7.86 lb
Dimension: 11.22 × 7.28 × 2.68

Features

● 16 Channels

● Channel Lock

● Scan Channel

● Volume Set

● Modem Set

● Squelch Level

● Repeater Delay

● High (25W) / Low (5W) Power Switching

● Backled Adjustment

● Low Temperature Mode

● 50 CTCSS codes/210 DCS codes

● Init Option

● Software Version

FAQ

Yes, the speaker-microphone for the RT97S and RT97L are compatible and can be used interchangeably.

The RT97L antenna model is MA09, operating in the 462-467 MHz frequency range.

Height: 175 cm (approximately 5.74 feet)

Wind resistance: 50-60 m/s

Additional specifications:

VSWR (Standing Wave Ratio) < 1.5

Antenna gain: 7.2 dBi

Connector type: SL16-K

Material: Fiberglass

Yes, the 15-meter 50-3 Pure Copper Coaxial Extender Cable for RT97 will work with the RT97L. However, the RT97L’s antenna cable has been upgraded to 15 meters of 50-7 cable, which offers lower loss compared to the previous version.

Yes, the RT97L can be adapted to use an N-type connector. We recommend the following two options:

Use an adapter: This is the most cost-effective and preferred method. The adapter is inexpensive and ensures no signal loss.

Replace the connector yourself: If you choose to replace the connector, please ensure that you use coaxial cable with an outer diameter of 4mm. Be cautious, as improper replacement can damage the paint and affect the waterproofing.

The RT97L is pre-programmed with 16 GMRS channels, all set according to GMRS standards. The device includes dedicated GMRS repeater frequency points, ensuring full compliance with regulatory requirements. To enhance convenience, the first 8 channels are set for wideband operation, while the remaining 8 are set for narrowband operation. This allows users to easily switch between the two bandwidth settings without needing additional programming.

When you click "Read", a password input box will appear. You can directly click "close" to ignore it, or input 288288.
If you want to set a password, click "write", the first "password" is 288288, then enter your "New Password".

The difference in power can be significant. For example, using 5W of power, communication over a long distance might result in weak or no signal. However, with 25W of power, the range can greatly improve, allowing for clearer and more reliable communication over much longer distances.

While power is crucial, factors like antenna height also play an important role. In situations where elevation isn't favorable, higher power can be a big help in extending communication range.

The factory output is between 22W-25W. However, when operating with a duplexer, there may be power loss, reducing output to around 15W-22W, depending on the quality, thickness, and length of the feeder cable. 

For users operating with GMRS, the frequency range of the RT97L is:

TX (Transmit): 462.550 - 462.725 MHz
RX (Receive): 467.550 - 467.725 MHz
This range allows for effective communication and operation in the designated GMRS frequencies, which are crucial for users who need clear, uninterrupted signals.

The RT97L portable gmrs repeater is designed with flexibility in mind. By connecting the repeater to a Raspberry Pi via its DB-9 interface, users can expand the repeater's functions. This allows for easy programming and the ability to customize the repeater to fit specific needs, whether you’re operating in a particular area, enhancing security, or fine-tuning performance.

Receive Mode Absorption: 180mA
Transmit Mode Absorption: 5.5A

The RT97L gmrs mobile repeater is rated IP66 waterproof, meaning it can withstand powerful jets of water from all directions. This rating ensures that it performs well even in harsh weather or environments with heavy water flow. However, to ensure optimal performance and longevity, it's always a good idea to install the repeater in a protected location, especially in areas with extreme weather conditions.

Yes, the RT97L portable repeater comes equipped with an internal duplexer, which is essential for enabling the repeater to work efficiently with an antenna. The duplexer allows the device to handle both transmit and receive signals simultaneously without interference.

The RT97L is capable of storing 16 different channels, which means it can quickly switch between up to 16 communication frequencies.

The duty cycle for RT97L repeater is 100%.

RT97S base station comes with a DB-9 port, which can be directly connected to the included speaker mic and is compatible with Raspberry Pi.

Because of the limitations on FRS by the FCC, this repeater can be only ued for GMRS radio, no mater handheld GMRS radios or Mobile GMRS radios.

Yes, the RT97L repeater is compatible with GMRS handheld radios that are repeater capable.

No. This feature requires factory-installed hardware (a custom repeater and duplexer). It must be purchased as a pre-configured pair and cannot be manually set up using separate units.

RelevantDocuments

Driver

RT97-USB-Driver
175.14 KB rar

Software

RT97L-Programming-Software-Custom
1002.99 KB zip
RT97L-Programming-Software-DMR
121.92 KB zip
RT97L-Programming-Software-GMRS
985.42 KB rar

Manual

RT97L-User-Manual-GMRS
2.4 MB pdf

Firmware

RT97L-Update-Firmware-V1.5
1.46 MB zip

Reviews

Customer Reviews

0
Based on 0 reviews
Quality
Ship
Other

Write a review

Your rating:

All Reviews

Loading...

Add To Cart

Availability: In Stock

products.goods.vendor: HVL

products.goods.productType: Caps

$135.00$99.00
The standard chunk of Lorem Ipsum used since the 1500s is reproduced below for those interested.
  • image
  • image
  • image
  • image
  • XS
  • S
  • M
  • L
  • XL
Compare
DELIVERY
  • Dispatch: Within 24 Hours
  • Free shipping across all products on a minimum purchase of $50.
  • International delivery time - 7-10 business days
  • Cash on delivery might be available
  • Easy 30 days returns and exchanges
RETURNS

If you do not like the product you can return it within 15 days - no questions asked. This excludes bodysuits, swimwear and clearance sale items. We have an easy and hassle free return policy. Please look at our Delivery & Returns section for further information.

Product Question

The file link will be sent to your mailbox via email