- Tier-2 DMR Standard of ETSITS102-361.TIA/EIA-603C and MIL-STD-810Standard.
Base station mode and dispatcher mode available.
Maximal power 25W/50W, increases the communication distance and reliability.Unaffected sensitivity even under transmitting mode with full power.
Fast transmitting for analog signaling and sub-tone signaling, support CDCSS grouping at same frequency, make multiple CDCSS could be transmitted at the same frequency.
Specification:
| General Specifications | |
|
Model |
RT92 |
|
Frequency |
400-470MHZ |
|
Channel spacing |
25 kHz/12.5 kHz |
|
Operating Voltage |
100~264VAC~50/60Hz |
|
Antenna port transmitting spurs 9KHz~1GHz: |
≤-36dBm(Launch mode) ≤-57dBm(Idle mode) |
|
1GHz~12.75GHz: |
≤-30dBm(Launch mode) ≤-47dBm(Idle mode) |
|
Chassis port radiation spurs 9KHz~1GHz: |
≤-36dBm(Launch mode) ≤-57dBm(Idle mode) |
|
1GHz~12.75GHz: |
≤-30dBm(Launch mode) ≤-47dBm(Idle mode) |
|
Antenna impedance |
50Ω |
|
Speaker impedance |
40Ω |
|
Operating temperature |
-10 C~+55 C |
|
Connector |
Type N(M) |
|
Volume (length × width × height) |
482mm×440mm×89mm |
|
weight |
≤12KG |
|
Safety Specifications |
|
|
Insulation resistance |
≥100MΩ（Test voltage DC500V），Insulation resistance in hot flashes≥2MΩ |
|
Dielectric strength |
AC withstand voltage 1000V（Leakage current≤5mA），1min，No breakdown, arcing and corona |
|
Reception Specifications |
|
|
Digital sensitivity (BER5%) |
≤-117dBm |
|
Adjacent channel selectivity |
≥65dB |
|
Intermodulation immunity |
≥70dB |
|
Intermodulation immunity |
≥90dB |
|
Audio output power |
3.0W |
|
Transmission specifications |
|
|
Frequency error |
≤2.5 ppm |
|
Transmit power |
50W |
|
Adjacent channel power |
±12.5kHz：≤-60 dB，±25kHz：≤-70 dB |
|
Transient switching adjacent channel power |
±12.5kHz：≤-50 dB，±25kHz：≤-60 dB |
|
Modulation |
4FSK |
|
4FSK digital modulation |
data 7K60FXD、Data plus voice 7K60FXW |
|
Digital speech encoder |
AMBE++ or SELP |
|
Transmitted bit error rate |
≤1.5% |
- Tier-2 DMR Standard of ETSITS102-361.
- TIA/EIA-603C and MIL-STD-810Standard.
- Maximal power 25W/50W, increases the communication distance and reliability.
- Unaffected sensitivity even under transmitting mode with full power.
- Modular design and optimized RF performance, easy maintenance.
- Many technology patents applied.
- Fast transmitting for analog signaling and sub-tone signaling, support CDCSS grouping at same frequency, make multiple CDCSS could be transmitted at the same frequency.
- Base station mode and dispatcher mode available.
- Communication between radio sand cable telephone (PABX/PSTN) and mobile phones.
- RT92 is Type N F connector
Extended Functions:
- Auto-configuration, Self-diagnostic, Remote monitor and Network management (Monitor system software need).
- Communication between radio sand cable telephone and mobile phones.
- Via Ethernet network, connect with GPRS/ CDMA/ 3G/ 4G/ LTE/ WIFI wirelessly (Extend to support the wireless IP network), support IP soft switch and multiple sites networking.
Accreditations
1. Tier-2 DMR Standard of ETSITS102-361.
2. TIA/EIA-603C and MIL-STD-810Standard.
3. Maximal power 25W/50W, increases the communication distance and reliability.