IP Networking DMR Digital /Analogue Repeater Retevis RT92

1. Tier-2 DMR Standard of ETSITS102-361.
2. TIA/EIA-603C and MIL-STD-810Standard.
3. Maximal power 25W/50W, increases the communication distance and reliability.
In stock
SKU
A9162A
$1,500.00

Retevis RT92 Digital Repeater

Features:

  • Tier-2 DMR Standard of ETSITS102-361.
  • TIA/EIA-603C and MIL-STD-810Standard.
  • Maximal power 25W/50W, increases the communication distance and reliability.
  • Unaffected sensitivity even under transmitting mode with full power.
  • Modular design and optimized RF performance, easy maintenance.
  • Many technology patents applied.
  • Fast transmitting for analog signaling and sub-tone signaling, support CDCSS grouping at same frequency, make multiple CDCSS could be transmitted at the same frequency.
  • Base station mode and dispatcher mode available.
  • Communication between radio sand cable telephone (PABX/PSTN) and mobile phones.
  • RT92 is Type N F connector

Extended Functions:

  • Auto-configuration, Self-diagnostic, Remote monitor and Network management (Monitor system software need).
  • Communication between radio sand cable telephone and mobile phones.
  • Via Ethernet network, connect with GPRS/ CDMA/ 3G/ 4G/ LTE/ WIFI wirelessly (Extend to support the wireless IP network), support IP soft switch and multiple sites networking.

Specification:


General Specifications

Model

RT92

Frequency

400-470MHZ

Channel spacing

25 kHz/12.5 kHz

Operating Voltage

100~264VAC~50/60Hz

Antenna port transmitting spurs 9KHz~1GHz:

≤-36dBm(Launch mode) ≤-57dBm(Idle mode)

1GHz~12.75GHz:

≤-30dBm(Launch mode) ≤-47dBm(Idle mode)

Chassis port radiation spurs 9KHz~1GHz:

≤-36dBm(Launch mode) ≤-57dBm(Idle mode)

1GHz~12.75GHz:

≤-30dBm(Launch mode) ≤-47dBm(Idle mode)

Antenna impedance

50Ω

Speaker impedance

40Ω

Operating temperature

-10 C~+55 C

Connector

Type N(M)

Volume (length × width × height)

482mm×440mm×89mm

weight

≤12KG

Safety Specifications

Insulation resistance

≥100MΩ(Test voltage DC500V),Insulation resistance in hot flashes≥2MΩ

Dielectric strength

AC withstand voltage 1000V(Leakage current≤5mA),1min,No breakdown, arcing and corona

Reception Specifications

Digital sensitivity (BER5%)

≤-117dBm

Adjacent channel selectivity

≥65dB

Intermodulation immunity

≥70dB

Intermodulation immunity

≥90dB

Audio output power

3.0W

Transmission specifications

Frequency error

≤2.5 ppm

Transmit power

50W

Adjacent channel power

±12.5kHz:≤-60 dB,±25kHz:≤-70 dB

Transient switching adjacent channel power

±12.5kHz:≤-50 dB,±25kHz:≤-60 dB

Modulation

4FSK

4FSK digital modulation

data 7K60FXD、Data plus voice 7K60FXW

Digital speech encoder

AMBE++ or SELP

Transmitted bit error rate

≤1.5%

Package Includes:

  • 1 x RT92 DMR Digital Repeater
  • 1 x power cable
  • 1 x User manual
  • 1 x Programming cable
  • 3 x Fuse
  • 2 x Fixed piece
More Information
Model RT92
Radio type Repeater
Technological regimes Digital
Frequency band UHF
Frequency range 400-470MHZ
Memory Channel N/A
RF Power N/A
Operating Temperature N/A
Operating Voltage 100~264VAC~50/60Hz
Battery N/A
Size 482mm×440mm×89mm
Antenna onnector N/A
Antenna Impedance N/A
Accessory onnector N/A
Features N/A
Other parameters N/A
Write Your Own Review
You're reviewing:IP Networking DMR Digital /Analogue Repeater Retevis RT92
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?

Returns

  1. Items purchased from retevis.com can be returned within 30 days of receipt of shipment in most cases.The return must be in its original condition,including gifts. For further detail,please find Return Policy (Opens in a new window).
  2. Click here to login the RMA Page (Opens in a new window) or email support@retevis.com.


Warranties

  1. Retevis provide free maintenance for products only purchased at www.retevis.com within the warranty time. For further detail,please find Warranty Policy (Opens in a new window).
  2. If need maintenance, please send e-mail to support@retevis.com.