Reviews 26,062   ~   4.9

Review summary

4.9
Excellent
26.1k reviews
Quality
Ship
Other
All Reviews
SuNSeT DrEaMeR
HD2

I've never used these type of radios and as far as I know they work as intended. Tune in to different frequencies and listen. Seems well made. Charges quickly and holds a charge for while. Still learning how to use it! No issues.

Grant Fritchey
HD2

The Retevis Ailunce HD2 is a nicely performing DMR radio. The radio covers the basics, simplex FM transmit and receive, as well as working just fine in DMR. The radio supports blue tooth and the kit came with a blue tooth speaker/mic. I also was able to test the GPS version of the radio. In short, quite a few bells and whistles to this radio. Let's talk about it. The radio itself is made from pretty tough feeling plastic. It has rubberized buttons that press pretty well with a good click, letting you know you pushed it. One knob is for on/off & volume and the other is for switching channels and settings in the menus. They're nicely sized and differentiated enough that you can tell 'em apart in the dark. However, I did find it really easy to adjust the volume when I was changing channels or menus and that was a bit irritating. In addition the buttons on the front and the standard push-to-talk, you get three additional function buttons that you can program through the code plug editor (much more on that below). It has a pretty clear and easy to read color screen. I know the common complaint on color screens is that they wash out in the sun. I generally haven't found that to be true, but it sure is on this radio. I turned the brightness up to 10 and when in sunlight, the screen just washed away. Not a showstopper, or even a big deal, but something you should know. The battery can be charged from the supplied cradle, or, you can use USB-C (I'm to the point where I'll knock a couple of stars off a radio that doesn't support USB-C charging). Battery life seems quite good. The kit I received, pictured above, included a programming cable and a bluetooth speaker mic. I found the programming cable worked, plug and play, just fine. However, I did go and download the driver from the Ailunce support site. It worked just fine with the programming software you can also download from that site. Know that Windows Defender does not like the files and you may need to bypass Defender to get them on your machine (and yes, for some people, this is a showstopper). The blue tooth speaker mic is actually quite nice. Sound quality is good. Signal reports were that it was a little quiet. I did find the PTT to release a little to easily at times, but overall, it worked very nicely. It's a great add to this radio, giving you a very hands free, and more private, experience using the radio (NOTE: not hands free in the car, although, I didn't test that setup to see if it worked). After programming (again, more on that later), I was able to make DMR contacts with the radio. It transmitted nicely to local repeaters and my hotspot, with no issues. Signal reports were that the radio was nice and clear with a good volume. Same for the speaker/mic. I got pretty good reach on FM simplex, transmitting well over two miles in tests. So, programming. Let me start by saying this is my 7th, distinct, DMR radio. I've programmed all of them, including this one, successfully. That said, this was one of the harder ones to program that I've used (not counting the first one when I was both figuring out DMR AND programming DMR, two distinct, but related, and interacting, concepts). It took me quite a while to get it doped and in fact, I finally had to download a code plug from the Ailunce support site. That did the trick. I figured out all the settings I was missing (like, transmission had to be set to color code, if you want color code used, all my other radios were, if you put in a color code, you were using that, just weird). There is a steep learning curve to this software. Further, the defaults when you add a new channel, were extremely irritating. I spent a lot of time turning things off that were turned on by default. Also, I never did find all the settings in the code plug software. For example, I like to display channel names when in channel mode. Easy setting from the radio, but I couldn't find the equivalent in the code plug software, and so, despite reading first from the radio, then programming changes (always a good habit, if your radio is working, reading first ensures it's settings are the one you use, in most software), I still got the display reset, every time. More irritation. However, once you get it worked out, the software isn't that bad (there are much worse out there) and you'll be able to set up zones, channels, listening groups and contacts pretty easily. The GPS works. That's about all I can say about it though. There's just almost no functionality. It transmits GPS coordinates on digital channels, and digital channels only. If someone is set up correctly, they'll receive them. If they're transmitting GPS location, you'll see it on your screen. That's it. No APRS. No tracking, direction, etc.. Really, kind of disappointing. I'd suggest you skip getting the GPS unit since there's so little there for the extra money. Overall, this is a very solid performing DMR radio, especially for the money. While the GPS isn't a big deal, the inclusion of the blue tooth and the programming cable make for a great little kit. I like the operation. I did find the programming software to be real pain and I would have knocked off more stars, but publishing code plugs won them back a star. Once programmed, you've got a functional DMR radio.

Grant Fritchey
HD2

The Retevis Ailunce HD2 is a nicely performing DMR radio. The radio covers the basics, simplex FM transmit and receive, as well as working just fine in DMR. The radio supports blue tooth and the kit came with a blue tooth speaker/mic. I also was able to test the GPS version of the radio. In short, quite a few bells and whistles to this radio. Let's talk about it. The radio itself is made from pretty tough feeling plastic. It has rubberized buttons that press pretty well with a good click, letting you know you pushed it. One knob is for on/off & volume and the other is for switching channels and settings in the menus. They're nicely sized and differentiated enough that you can tell 'em apart in the dark. However, I did find it really easy to adjust the volume when I was changing channels or menus and that was a bit irritating. In addition the buttons on the front and the standard push-to-talk, you get three additional function buttons that you can program through the code plug editor (much more on that below). It has a pretty clear and easy to read color screen. I know the common complaint on color screens is that they wash out in the sun. I generally haven't found that to be true, but it sure is on this radio. I turned the brightness up to 10 and when in sunlight, the screen just washed away. Not a showstopper, or even a big deal, but something you should know. The battery can be charged from the supplied cradle, or, you can use USB-C (I'm to the point where I'll knock a couple of stars off a radio that doesn't support USB-C charging). Battery life seems quite good. The kit I received, pictured above, included a programming cable and a bluetooth speaker mic. I found the programming cable worked, plug and play, just fine. However, I did go and download the driver from the Ailunce support site. It worked just fine with the programming software you can also download from that site. Know that Windows Defender does not like the files and you may need to bypass Defender to get them on your machine (and yes, for some people, this is a showstopper). The blue tooth speaker mic is actually quite nice. Sound quality is good. Signal reports were that it was a little quiet. I did find the PTT to release a little to easily at times, but overall, it worked very nicely. It's a great add to this radio, giving you a very hands free, and more private, experience using the radio (NOTE: not hands free in the car, although, I didn't test that setup to see if it worked). After programming (again, more on that later), I was able to make DMR contacts with the radio. It transmitted nicely to local repeaters and my hotspot, with no issues. Signal reports were that the radio was nice and clear with a good volume. Same for the speaker/mic. I got pretty good reach on FM simplex, transmitting well over two miles in tests. So, programming. Let me start by saying this is my 7th, distinct, DMR radio. I've programmed all of them, including this one, successfully. That said, this was one of the harder ones to program that I've used (not counting the first one when I was both figuring out DMR AND programming DMR, two distinct, but related, and interacting, concepts). It took me quite a while to get it doped and in fact, I finally had to download a code plug from the Ailunce support site. That did the trick. I figured out all the settings I was missing (like, transmission had to be set to color code, if you want color code used, all my other radios were, if you put in a color code, you were using that, just weird). There is a steep learning curve to this software. Further, the defaults when you add a new channel, were extremely irritating. I spent a lot of time turning things off that were turned on by default. Also, I never did find all the settings in the code plug software. For example, I like to display channel names when in channel mode. Easy setting from the radio, but I couldn't find the equivalent in the code plug software, and so, despite reading first from the radio, then programming changes (always a good habit, if your radio is working, reading first ensures it's settings are the one you use, in most software), I still got the display reset, every time. More irritation. However, once you get it worked out, the software isn't that bad (there are much worse out there) and you'll be able to set up zones, channels, listening groups and contacts pretty easily. The GPS works. That's about all I can say about it though. There's just almost no functionality. It transmits GPS coordinates on digital channels, and digital channels only. If someone is set up correctly, they'll receive them. If they're transmitting GPS location, you'll see it on your screen. That's it. No APRS. No tracking, direction, etc.. Really, kind of disappointing. I'd suggest you skip getting the GPS unit since there's so little there for the extra money. Overall, this is a very solid performing DMR radio, especially for the money. While the GPS isn't a big deal, the inclusion of the blue tooth and the programming cable make for a great little kit. I like the operation. I did find the programming software to be real pain and I would have knocked off more stars, but publishing code plugs won them back a star. Once programmed, you've got a functional DMR radio.

Steven S
HD2

For starters, don't listen to the sad hams and their fear of spurious transmission, FCC approvals, and other nonsense that they chatter on about endlessly. If a radio is not $600-$1,500 and absolutely perfect, they'll bash it. Another issue in reviews to look out for is people will say certain radios don't work well and its through no fault of the radio, but the understanding or use of the end user. You can have a radio perfectly programmed, but if you're in an area with shoddy reception, it is still not going to work well. I think a lot of people don't take this into consideration when writing reviews. They think you can just program a radio for a local repeater and take nothing else into consideration; which is far from the truth. There are a lot of factors that effect any radio's performance, no matter how perfectly designed and programmed it is. I've used $1,000 Motorola hand held radios in my work and there are times because of the area you are in, they still don't work well. But, to the HD2; all in all, this radio does what it advertises it can do and then some AND for a budget price. Is it perfect? No. My 3 biggest issues with the radio are that the programming software can be a little glitchy (freezes up for about 30 seconds every time you save your program...once you know this, it is an easy work around to just wait 30 seconds). Also, if you install the wrong firmware update it will brick the radio. This can be undone, but you have to play with the radio for a bit to figure out how (disconnect it from everything and pull the batter for 10 seconds before reconnecting it and putting it back into programming mode). The last thing is, that both the firmware updates and programming software will trip every virus scanner you have when you try to install any of it. I had to pretty much shut down ever virus protection I had in order to install the programs and then tell Malwarebytes to ignore the software afterwards. I've read this is due to some security certificate not being signed (can't confirm this though), but it is a known issue amongst Ailunce users for both the HD1 and HD2 and I've never heard of it causing problems for anyone, beyond the annoyance of having to momentarily shut down their virus protection. Just remember to turn it back on after. The radio has your standard range as most radios do and I was able to hit a few repeaters miles away from me without issue. This radio can also easily be unlocked to cover both Ham and GMRS channels (136mhz - 225 MHz and 400MHz - 520Mhz). It's incredibly simple to find out how to do this with a quick youtube search. One big question everyone had when this radio first came out was, "Will it have AES 256?" And I can affirm that with the most recent update from a few months ago it DOES have AES 256. It also has AES 126 and a few of Ailunce's proprietary encryption programs. I'm not sure what they are, but the HD1 and HD2 both have them; so you should be able to encrypt communication between the 2 without issue. I however, would not bet my life on how secure the standard Ailunce encryption is; if you want true security, you're going to have to use AES 256. The Ailunce does allow you to write your own random encryption key for AES-256 (and the other encryption programs as well), but from my understanding, it is best to have a computer do this for you for maximum security. Obviously to legally fully utilize all the features of this radio in the US, you would have to be in an "emergency" situation, but I'm guessing you're an adult and can decide when that situation arises for you. Overall, for the price the radio is pretty good. Not perfect, but pretty darn good. If you're looking for a budge radio it's hard to beat the HD2.

Steven S
HD2

For starters, don't listen to the sad hams and their fear of spurious transmission, FCC approvals, and other nonsense that they chatter on about endlessly. If a radio is not $600-$1,500 and absolutely perfect, they'll bash it. Another issue in reviews to look out for is people will say certain radios don't work well and its through no fault of the radio, but the understanding or use of the end user. You can have a radio perfectly programmed, but if you're in an area with shoddy reception, it is still not going to work well. I think a lot of people don't take this into consideration when writing reviews. They think you can just program a radio for a local repeater and take nothing else into consideration; which is far from the truth. There are a lot of factors that effect any radio's performance, no matter how perfectly designed and programmed it is. I've used $1,000 Motorola hand held radios in my work and there are times because of the area you are in, they still don't work well. But, to the HD2; all in all, this radio does what it advertises it can do and then some AND for a budget price. Is it perfect? No. My 3 biggest issues with the radio are that the programming software can be a little glitchy (freezes up for about 30 seconds every time you save your program...once you know this, it is an easy work around to just wait 30 seconds). Also, if you install the wrong firmware update it will brick the radio. This can be undone, but you have to play with the radio for a bit to figure out how (disconnect it from everything and pull the batter for 10 seconds before reconnecting it and putting it back into programming mode). The last thing is, that both the firmware updates and programming software will trip every virus scanner you have when you try to install any of it. I had to pretty much shut down ever virus protection I had in order to install the programs and then tell Malwarebytes to ignore the software afterwards. I've read this is due to some security certificate not being signed (can't confirm this though), but it is a known issue amongst Ailunce users for both the HD1 and HD2 and I've never heard of it causing problems for anyone, beyond the annoyance of having to momentarily shut down their virus protection. Just remember to turn it back on after. The radio has your standard range as most radios do and I was able to hit a few repeaters miles away from me without issue. This radio can also easily be unlocked to cover both Ham and GMRS channels (136mhz - 225 MHz and 400MHz - 520Mhz). It's incredibly simple to find out how to do this with a quick youtube search. One big question everyone had when this radio first came out was, "Will it have AES 256?" And I can affirm that with the most recent update from a few months ago it DOES have AES 256. It also has AES 126 and a few of Ailunce's proprietary encryption programs. I'm not sure what they are, but the HD1 and HD2 both have them; so you should be able to encrypt communication between the 2 without issue. I however, would not bet my life on how secure the standard Ailunce encryption is; if you want true security, you're going to have to use AES 256. The Ailunce does allow you to write your own random encryption key for AES-256 (and the other encryption programs as well), but from my understanding, it is best to have a computer do this for you for maximum security. Obviously to legally fully utilize all the features of this radio in the US, you would have to be in an "emergency" situation, but I'm guessing you're an adult and can decide when that situation arises for you. Overall, for the price the radio is pretty good. Not perfect, but pretty darn good. If you're looking for a budge radio it's hard to beat the HD2.

Darrell Day
Darrell Day
Gregory
HD2

This handheld radio has great volume and sound. The GPS works great and there are many channels. I am very impressed with the quality and the amount of things the radio can perform. It has a very long range and would be great for any ham radio member. Great product Two thumbs up!

Gregory
HD2

This handheld radio has great volume and sound. The GPS works great and there are many channels. I am very impressed with the quality and the amount of things the radio can perform. It has a very long range and would be great for any ham radio member. Great product Two thumbs up!

Ty
HD2

Revetis/Ailunce hit this one out of the ball park again. If there's a company that listen to it's customer, Revetis/Ailunce is the one. Is it a perfect radio? No, but they are constantly improving with firmware updates and newer models. My first DMR radio was the Retevis R3TS and it's been a solid digital radio. There are many reviews of this radio stating there were some issues like the radio is unable to encode and decode or unable to waking up from NOAA channels. Well I don't have any of these issues. There's an updated firmware you have to download from Retevis website. The only issues I have is that the exe file to flash the radio. Windows see it as a Trojan virus. After disabling Windows Defender, I was able to flash the radio with the latest firmware. The CPS is not perfect but it works like the CPS for the R3TS and HD1. It took me a good hour or so to set the radio up with a few DMR channels and a few 2m and 70cm repeaters. Was able to hit all repeaters about 44 miles away with a solid clear audio and full quieting. On the DMR side, the audio is night and day better than the R3TS and HD1. Again they are constantly improving the radio this one, the HD2 is a big leap forward over the HD1. The battery last over a day of heavy use and you can either charge it via the USB Type-C port on the battery or use the cradle to charge it. The one thing I didn't expect that this radio now support Bluetooth audio and it comes with a nice Revetis brand earpiece with a PTT button on the bottom of the earpiece. Pairing with the radio was fast and easy. Very nice.. I also test this radio on 2m and 70cm simplex (National Calling frequency) audio was a bit crackling but was able to talk to another station about 10 miles away. Power output is around 5 watts and that is all you really need. Getting a better antenna would improve the range much more but you will lose the IP67 rating. This is one of the few radio in this price point that is has a true IP67 rating. I took my chance and hose this radio down with a garden hose for a good 20 seconds while listening to a NET. Shook the radio of the water off and it works with no issues. Currently using this radio with a pi-star hotspot so all the DMR channels are set to low. There's 2 DMR repeaters around me and I was able to make full contact on the World Talk group and check it with a Parrot and audio feed back was nice and clear. Again much improved over the HD1 and R3TS. This radio is packed with features pretty much comes with everything you need to start talking on DMR . And I think any issues with this radio that most users have is not knowing how to properly setup the radio or there was a setting missed while programming it with the CPS. I also took several photos of this radio next to my R3TS and the Ailunce HA1G to show the size reference. Overall this is a great digital radio that has a great range on analog and the audio on DMR (12.5k narrow band) sounds great.