There's a new procedure to unlock for 136-174 & 400-480 and lock to HAM bands only with firmware 1.51.Unlock: Radio off hold down the lowest side key and 7 on keypad and turn on.Lock to HAM bands: Radio off hold down lowest side key and 9 on keypad and turn on.On my tinySA the RT85s TX 3-3.5 watts perfectly on frequency and harmonics below FCC part 97 requirements (see pictures). It's a clean transmitter. The stock rubber duck is great for VHF and MURS, but marginal for UHF and GMRS. With the rubber duck I easily hit the VHF club repeater from a clear 11 miles with full quieting. Do yourself a favor and buy TYT 14" whips that have excellent VSWR on both bands for $6 on AliExpress.THE RT85 RADIOS ARE EXCELLENT and HIGHLY RECOMMENDED.
I always avoided Chinese radios since they have been known as having bad quality and substandard RF performance but after seeing that QRZ/Gigaparts rebranded this and that it's FCC-certified I took a closer look and picked 2 up for $50, and wow - they are very nice radios, simply amazing at this price point. I would not use them for a main HT (the menus are not very well designed, takes a lot of button presses to do anything) but they are perfect for AllStar / EchoLink / DVSwitch node radios. See my demo video on youtube ("Build a Full-Duplex AllStar Node for Under $200...") or my QRZ page (NR9V). I am using 2 of these in a Cross-Band FULL-DUPLEX AllStar node where one radio transmits on 147MHz and the other receives on 431MHz and they work perfectly. I can walk over a mile from my house and get into the node very well. ie. the RT85 RX HT is picking me up just fine from 1 mile away on low-power even though the node is simultaneously transmitting back to me from the TX RX85 which is less than 18" away.
Good radio and the package arrived in good condition very well packaged I congratulate this seller
Great, powerful HT. With a good antenna, nobody complains about my signal. Easy to program manually and by CHIRP. I highly recommend it for the new ham.
Item was perfect to take off roading. We comminuted well.
Gift to a friend for his work and he said he likes it.
Nice product for the price. Even comes with instructions on how to use these type of radios. I'm still learning but nice so far.
Well made, a very good value for the money. And batteries are cheaper. Needs to have prgm cable and disc with the product. Lot easier than the keypad.
Nice radios overall. Here is some feedback on BQ1.46 firmware it shipped with:1. FM radio mode doesn't appear to include a scan function. The FM radio in the RT-85 does have 24 dedicated memory slots for the FM radio though so it appears that radio stations first need to be identified manually and then programmed individually into those 24 slots. The FM radio is a nice feature though.2. There seems to be no option in the radio menu firmware or programming software to exclude a memory channel from the memory channel scan list (short of deleting the memory channel assignment). There seems to be a grayed-out option buried in the programming software that suggests a particular memory channel could be skipped however setting it doesn't seem to stick in the software. I have NOAA weather frequencies I'd like to program into memory but exclude from a scan. I don't see any way to exclude a programmed memory channel from a scan which is disappointing. I really hope there is a solution for excluding memory channels from a scan in a future update.3. Channel width has Wide, MIDD, and NARR settings. I gather that Narrow channel bandwidth is 12.5kHz, Wide is 25 MHz. What is the "Mid" channel width though as it isn't mentioned anywhere.4. The RT-85 (Ham Radio) and TD-H5 (GMRS radio) are physically similar but the button operation is different.5. The USB-C or cradle chargeable batteries on the TD-H5 fit the RT-85 (which are only charged via a cradle) but a couple plastic tabs must be removed in order to fit the RT-85 batteries on the TD-H5 (I used an exacto knife on the RT-85 batteries to make them compatible with the TD-H5). The RT-85 charging cradle works with both radio and battery combinations. Both radios do require a respective license to transmit legally in the US.6. When programming frequencies to memory that are not legal to transmit on, I advise leaving the transmit frequency blank in the programming software to prevent accidentally transmitting on them. Warning: There is an alarm feature that by default appears to transmit an alarm on the frequency you are currently tuned to if you press F and then # (which is easy to do inadvertently).7. Here is a minor nitpick, but it would be nice to start a scan with a single button press instead of pressing three buttons (F-1-F).8. Very rarely, I have noticed that the FM radio mode may turn on even though I did not press the button to enable it. Power cycling the radio sometimes seems to help prevent that.