Reviews 26,093   ~   4.9

Review summary

4.9
Excellent
26.1k reviews
Quality
Ship
Other
All Reviews
Stevie G
C9018A

Used this cord to reprogram Retevis H-777S radios using an old 32 bit laptop running Windows XP. Computer recognized the cable on first attempt and it worked with no issues whatsoever. It comes with a driver CD. After CHIRP failed me, I went to Retevis website, downloaded their programming software and the reprogramming took all of about 10 min in total. So far, a great item.

HiTechHiTouch
C9018A

Chirp (the computer application used to program radios) has no problem talking to my radios over the cable.Generally, the cable clicks into the radio and stays connected. Some radios don't have much clearance, but this cable doesn't need much.

Rector Praetorius
C9018A

After having installed the proper prolific driver for my OS, this was totally plug-and-play. I read a lot of reviews about a lot of these cables on -- including a lot of horror stories dealing with various chipsets and hardware plugs not fitting the device and guys claiming hours and days wasted -- and chose this one based on decent reviews and guys having posted a lot of useful information about drivers, COM ports, et cetera. Still, even knowing that 99% of the "horror" stories people post on are by folks who don't really understand what they are doing -- I knew I might be rolling the dice. So imagine how pleased I was that I got this thing up and running in less than five minutes -- Prolific driver loaded properly, proper COM port .was found, CHIRP functioned perfectly once I chose to "download radio" selecting my Baofeng UV-5X. I can't promise everybody will have the same experience as me, but this inexpensive cable makes using CHIRP a joy to use!

MAdams
C9018A

The good: it worked to program my Arcshell AR-6 portable radiosThe bad: The description said that it came with a CD. I'm fine that it didn't, but it also didn't come with any directions - not even to direct you to a website. I found myself searching for the device driver, and then it is unclear which is the exact correct driver, as the model numbers on do not match any on their website (that I could find).In the end, it was just 25 minutes wasted and it all worked ok in the end.

ACP13
C9018A

Worked great on Linux with CHIRP. Less money than the cable from other manufacturers. I kept getting "access denied," initially when trying to use the cable but if you lookup "access denied chirp fix," it's one line of code to cut and paste into the terminal. Easy.

Wendie Hale
C9018A

I purchased this product to program Baofeng UV-5R hand held radio because the Baofeng cable that came with the ham radio did not work. I am happy to say that it worked great with CHIRP and this product is cheaper than the other programming cables that are for sale, so a win, win situation for me.In addition, the customer support on this product was great. Before purchasing I contacted customer support to ask if this programming cable would work with Windows OS 10. They assured me that it would and offered a money back guarantee if it did not. They even went the extra mile to followup to see if programming cable worked out for me, which it did.

George Fliger
C9018A

Works great. Comes with necessary software and driver included on a mini-CD. Although it wasn't included with the radios, when I voiced my displeasure at having to buy this cable as an accessory (packages of 3 or more include the cable), the seller gave me a partial refund and is giving serious consideration to including the cable with ALL there radio packages. As I said, works great and comes with outstanding customer service.

Dred7
C9018A

Didn’t use the include software. Just googled the CHIRP software (free to download / use - donatitions accepted). It took a minute to figure out the connections and radio on sequence for computer to recognize the radio in the software. Once that was done, easily save a profile with frequencies I wanted in the channel numbers, then cloned it to my other 3 radios. 4 total changed and tested. Now they are all programmed to FRS main channels.

James Lummel
C9018A

Recently got my Tech ham license and to celebrate I purchased both a Btech UV-5X3 tri-band radio and a Baofeng GT-3TP Mark III tri-power radio to get going with, and I got this cable to be able to program them with as well. The radio end of the cable was a good fit on both radios, some non-Baofeng cables seem to have this problem but this one doesn't. The build quality on the cable looks pretty good, though time will tell.I'm running under Windows 10 Pro 64-bit and the driver loaded up automatically when I plugged it into the USB port, and I was able to connect to both radios using both CHIRP and the GT-3TP's Baofeng app.Only problem I ran into was not a cable brand specific problem but a problem with USB devices under Windows, and that was the radio would start transmitting 5-10 seconds after it was turned on with the cable plugged in.I tried the steps that were on the miklor.com website regarding the "Radio transmits while Programming" problem, but some versions of the Prolific drivers would actually make it go into transmit mode right away after powering up rather than in the 5-10 seconds of the driver Windows 10 loaded!Then I recalled some old troubleshooting advice for when there were problems with USB devices, and that was to go into the "Power Management" tab for the device and uncheck everything there, turning off all power management for the device.That fixed it! Now when I plug in and power up both radios no more transmitting while hooked to the computer!!Now to figure out what I need to actually program into the radios now that this is all working properly...

S. Wilson
C9018A

Cable works great with my UV-5RX3. I didn't need to use the disc or download any drivers. Transferred frequencies to the radio fast. Glad I got this because trying to program this radio without it is a pain!