Enter your email address to enjoy the discount.
×1. 25W High Power: Upgraded Duplexer, Extended Range
2. Clear signal transmission: Ultra-Low Loss 15M 50-7 Coaxial Cable
3. Plug & Play Setup: Built for continuous, all-day repeater operation.
4. IP66 Waterproof: Rugged aluminum case for outdoor, all-weather durability
5. Flexible Power: AC adapter, 12-24 V vehicle input or off-grid solar.
Customizable Range: [UHF: 400-470MHz; VHF: 136-174MHz; Offset ≥5MHz and ≤12MHz]; Frequencies Should be Programmed within ±200 kHz
NOTE:
The RT97L is a portable two way radio repeater that turns scattered handheld traffic into one connected site: park rangers on patrol, farm crews across sections, community GMRS groups on a shared net, and search and rescue teams staging in the field.

For crews that depend on the repeater through long shifts, that 25w power means no dropouts at peak traffic and no thermal timeouts mid-task. A High/Low power switch also lets you drop to 5W for short-range work to conserve power. With the antenna mounted high and in the clear, field results of 15-20 miles are realistic, and up to 15 km (about 9 miles) is achievable even through building obstructions; raise or lower the antenna and those numbers move fast.



When the temperature drops to -15 C, the internal heating system activates to keep the repeater operating through winter storms, and high-temperature protection guards the radio at the other end of the scale. Grain-elevator mounts, ski patrol huts, and unheated barns are all valid homes for this repeater.




Installation is deliberately simple: peel the silicone pad, screw the bracket to the case, drill and insert the wall plug, then secure the repeater to the wall with screws. One person with a drill finishes the mount in minutes, and the LCD screen confirms channel and power status without opening a computer.

When you click "Read", a password input box will appear. You can directly click "close" to ignore it, or input 288288.
If you want to set a password, click "write", the first "password" is 288288, then enter your "New Password".
Yes, the speaker-microphone for the RT97S and RT97L are compatible and can be used interchangeably.
The RT97L antenna model is MA09, operating in the 462-467 MHz frequency range.
Height: 175 cm (approximately 5.74 feet)
Wind resistance: 50-60 m/s
Additional specifications:
VSWR (Standing Wave Ratio) < 1.5
Antenna gain: 7.2 dBi
Connector type: SL16-K
Material: Fiberglass
Yes, the 15-meter 50-3 Pure Copper Coaxial Extender Cable for RT97 will work with the RT97L. However, the RT97L’s antenna cable has been upgraded to 15 meters of 50-7 cable, which offers lower loss compared to the previous version.
Yes, the RT97L can be adapted to use an N-type connector. We recommend the following two options:
Use an adapter: This is the most cost-effective and preferred method. The adapter is inexpensive and ensures no signal loss.
Replace the connector yourself: If you choose to replace the connector, please ensure that you use coaxial cable with an outer diameter of 4mm. Be cautious, as improper replacement can damage the paint and affect the waterproofing.
The difference in power between 5W and 25W is significant, especially when it comes to communication range. With 5W, communication over long distances may result in weak signals or no reception at all. In contrast, 25W power can significantly improve the signal range, allowing for clearer and more reliable communication over much longer distances. While power plays a crucial role, factors such as antenna height also impact range. In areas where elevation isn’t favorable, increasing the power to 25W helps extend the communication range and overcome obstacles.
The factory output of the RT97L repeater is between 22W and 25W. However, when the repeater operates with an internal duplexer, some power loss may occur. As a result, the actual output power may range from 15W to 22W depending on the quality, thickness, and length of the feeder cable. While the power might fluctuate a bit, it still ensures solid, reliable performance in most conditions.
The RT97L allows for customizable frequency settings. You can choose between:
UHF: 400-470MHz
VHF: 136-174MHz
The offset should be ≥5MHz and ≤12MHz, and frequencies should be programmed within ±200 kHz.
The RT97L mobile repeater is rated IP66 waterproof, meaning it can withstand powerful jets of water from all directions. This rating ensures that it performs well even in harsh weather or environments with heavy water flow. However, to ensure optimal performance and longevity, it's always a good idea to install the repeater in a protected location, especially in areas with extreme weather conditions.
Yes, the RT97L portable repeater comes equipped with an internal duplexer, which is essential for enabling the repeater to work efficiently with an antenna. The duplexer allows the device to handle both transmit and receive signals simultaneously without interference.
The RT97L is capable of storing 16 different channels, which means it can quickly switch between up to 16 communication frequencies.
The duty cycle for RT97L repeater is 100%.
That main difference between RT97S and RT97L is that RT97L is a 25W high power repeater while RT97S is 10W. And RT97L has the IP66 waterproof certification.
The RT97L is a portable two way radio repeater that turns scattered handheld traffic into one connected site: park rangers on patrol, farm crews across sections, community GMRS groups on a shared net, and search and rescue teams staging in the field.

For crews that depend on the repeater through long shifts, that 25w power means no dropouts at peak traffic and no thermal timeouts mid-task. A High/Low power switch also lets you drop to 5W for short-range work to conserve power. With the antenna mounted high and in the clear, field results of 15-20 miles are realistic, and up to 15 km (about 9 miles) is achievable even through building obstructions; raise or lower the antenna and those numbers move fast.



When the temperature drops to -15 C, the internal heating system activates to keep the repeater operating through winter storms, and high-temperature protection guards the radio at the other end of the scale. Grain-elevator mounts, ski patrol huts, and unheated barns are all valid homes for this repeater.




Installation is deliberately simple: peel the silicone pad, screw the bracket to the case, drill and insert the wall plug, then secure the repeater to the wall with screws. One person with a drill finishes the mount in minutes, and the LCD screen confirms channel and power status without opening a computer.

When you click "Read", a password input box will appear. You can directly click "close" to ignore it, or input 288288.
If you want to set a password, click "write", the first "password" is 288288, then enter your "New Password".
Yes, the speaker-microphone for the RT97S and RT97L are compatible and can be used interchangeably.
The RT97L antenna model is MA09, operating in the 462-467 MHz frequency range.
Height: 175 cm (approximately 5.74 feet)
Wind resistance: 50-60 m/s
Additional specifications:
VSWR (Standing Wave Ratio) < 1.5
Antenna gain: 7.2 dBi
Connector type: SL16-K
Material: Fiberglass
Yes, the 15-meter 50-3 Pure Copper Coaxial Extender Cable for RT97 will work with the RT97L. However, the RT97L’s antenna cable has been upgraded to 15 meters of 50-7 cable, which offers lower loss compared to the previous version.
Yes, the RT97L can be adapted to use an N-type connector. We recommend the following two options:
Use an adapter: This is the most cost-effective and preferred method. The adapter is inexpensive and ensures no signal loss.
Replace the connector yourself: If you choose to replace the connector, please ensure that you use coaxial cable with an outer diameter of 4mm. Be cautious, as improper replacement can damage the paint and affect the waterproofing.
The difference in power between 5W and 25W is significant, especially when it comes to communication range. With 5W, communication over long distances may result in weak signals or no reception at all. In contrast, 25W power can significantly improve the signal range, allowing for clearer and more reliable communication over much longer distances. While power plays a crucial role, factors such as antenna height also impact range. In areas where elevation isn’t favorable, increasing the power to 25W helps extend the communication range and overcome obstacles.
The factory output of the RT97L repeater is between 22W and 25W. However, when the repeater operates with an internal duplexer, some power loss may occur. As a result, the actual output power may range from 15W to 22W depending on the quality, thickness, and length of the feeder cable. While the power might fluctuate a bit, it still ensures solid, reliable performance in most conditions.
The RT97L allows for customizable frequency settings. You can choose between:
UHF: 400-470MHz
VHF: 136-174MHz
The offset should be ≥5MHz and ≤12MHz, and frequencies should be programmed within ±200 kHz.
The RT97L mobile repeater is rated IP66 waterproof, meaning it can withstand powerful jets of water from all directions. This rating ensures that it performs well even in harsh weather or environments with heavy water flow. However, to ensure optimal performance and longevity, it's always a good idea to install the repeater in a protected location, especially in areas with extreme weather conditions.
Yes, the RT97L portable repeater comes equipped with an internal duplexer, which is essential for enabling the repeater to work efficiently with an antenna. The duplexer allows the device to handle both transmit and receive signals simultaneously without interference.
The RT97L is capable of storing 16 different channels, which means it can quickly switch between up to 16 communication frequencies.
The duty cycle for RT97L repeater is 100%.
That main difference between RT97S and RT97L is that RT97L is a 25W high power repeater while RT97S is 10W. And RT97L has the IP66 waterproof certification.
Loading...
If you do not like the product you can return it within 15 days - no questions asked. This excludes bodysuits, swimwear and clearance sale items. We have an easy and hassle free return policy. Please look at our Delivery & Returns section for further information.
With over 16 years of innovation and growth, RETEVIS has crafted a wide range of two way radio walkie talkies, include industrial grade radios , long range radios, radio for construction site, business band radios, radio repeaters and wireless radio communication solutions. Trusted by millions of users worldwide, RETEVIS ensures reliable, clear, and instant communication across over 170 countries and regions, serving industries like construction, security, manufacturing, emergency response, and more.
At RETEVIS, we prioritize quality, with all radios or repeaters meeting international certifications like FCC and CE. Our R&D department continuously innovates to offer advanced radio solutions that meet the unique communication needs of our customers. Backed a professional staff group, we provide specialized technical support and customer service, ensuring a seamless experience for both individuals and businesses.View More
Subscribe to receive INFORMATION, EXCLUSIVE OFFERS and GIFTS
We use cookies to enhance your browsing experience, analyze site traffic, and personalize content. You can choose to accept all or manage your cookie preferences at any time.Cookie & Privacy Policy
We use cookies to operate the site, analyze traffic, and deliver advertising (including personalized advertising). You can accept all or reject all non-essential cookies. Cookie & Privacy Policy